How To Apply

HOW TO APPLY YOUR LASH ENHANCERS

Instructions RITA / AUDREY Lash Enhancers

Watch the Rita & Audrey Lash tutorials below before you start or read through the instructions.

Step 1 - Preparation

  1. Make sure your lids are clean and free from any oil.
  2. Gently bend the lash using a pencil if necessary. This will help them fit more naturally to your eye.

Step 2 - Magnetic Liner Application

  1. Apply mascara before attaching the Rita / Audrey Lash Enhancers if you want to wear it.
  2. Shake the Magnetic Liner really well before use.
  3. Rest the heel of your palm on your cheek and apply a very thin layer of Magnetic Liner to your lash line and allow it to dry completely. It is best to build up thin layers.
  4. Dry test: Pat your finger on your eye line to see if any liner comes off. If any liner comes off, it isn’t dry enough so be patient and build up slowly.

Step 3 - Rita / Audrey Lash Enhancers Application

  1. Apply the Rita / Audrey Lash Enhancers and gently press the magnets into place. Adjust as necessary.  Remember, you may need to play around at this stage if you have never worn lashes before.  It may take a few tries to get this right and that’s ok.
  2. Apply your eyeshadow as normal.  You can also use a small brush and use some shadow over the lash line to make it blend in seamlessly.

Step 4 - Removal of Rita / Audrey Lash Enhancers

  1. Gently pull the Lash Enhancers away from your eye and put them back in their box for safe keeping and to keep their shape.
  2. Use a Two Phase Oil Based make up remover to erase the liner and be patient.  Press the remover to the eyelid using a cotton pad and count to 15 as the remover needs time to soak into the liner to remove it effectively.

ALWAYS remove the Rita / Audrey Lash Enhancers fully before going for an MRI scan.

Check out the tutorial videos below:

Rita Lash Enhancers:

Audrey Lash Enhancers:

 

Instructions MAGIC Lash Enhancers

Watch the Magic Lash Tutorial below before you start or read through the instructions.

Step 1 - Preparation

  1.  Make sure your eyelids are clean and free from any oil. 
  2. Apply your mascara before applying your Magic Lash Enhancers you want to wear it.
  3. Roll each lash around your finger for 1 minute. This will help them take shape and will prevent the ends lifting.

Step 2 - Application

Depress the top until it clicks shut and shake your Magic Eyeliner pen well! 

  1. Hold your Magic Lash Enhancers against your eyes to gauge where they should be placed.  Our Lash Enhancers are designed to sit at the outer edges of your eyes.
  2. Apply your Magic Eyeliner to your lash line as you would like any normal eyeliner.
  3. Apply the Magic Lash Enhancers by lightly pressing along the lash line securing the lashes in place. Adjust as necessary. Pinch and press down near the roots of the lashes to set them. Touch up with Magic Eyeliner pen if required.
  4. Apply your eyeshadow as normal.  You can also use a small brush and use some shadow over the lash line to make it blend in seamlessly.
  5. Please clean your Magic Eyeliner pen regularly to remove makeup residue. You can do this by soaking a cotton pad in micellar water and gently swiping the pen tip. This will also stop it from drying out.

Step 4 - Removal of Magic Lash Enhancers

  1. Gently pull the Magic Lash Enhancers away from your eye and put them back in their box for safe keeping and to keep their shape.
  2. You can use normal eye make up remover to gently erase the adhesive liner.

Magic Lash Enhancers (Bo Peep):